Training Aids

DVD/Video Training

The GD&T training DVD/Video programs are designed to teach uniform application and interpretation skills to engineers, designers, inspectors, tool makers and shop floor personnel. It covers what personnel need to know in order to function and work in an organization that uses geometric tolerancing.

There is a GD&T training DVD/Video for both the GeoTol Pro Fundamentals and the GeoTol Applications and Tolerance Stacks program.

These comprehensive videos allow you to effectively teach many different personnel at many different levels. With these video programs you are guaranteed to get the same presentation and interpretation every time form and internationally recognized experts.

The geometric tolerancing video programs range from fundamental to advanced and can be viewed over and over. The videos are flexible and allow the programs to be combined and tailored to meet individual needs. Company parts and examples may be added to customize the presentation.

Models and practical demonstrations are used extensively throughout the programs to provide practical applications. The programmed student workbooks makes it easy for the the students to follow along with the examples and complete program exercises. The workbooks will serve as a valuable reference long after the course is over.

Each unit within a program takes about 1 to 2 hours to complete, depending on depth of coverage and number of student exercises. These GD&T training videos are perfect in a classroom or learning library to retrain and train new hires. There are student class exercises sprinkled throughout the programs. Solutions are included.

GeoTol Fundamentals Training Program DVD

Pro Fundamentals · DVD · 2009
GeoTol Pro Fundamentals Training – Complete Set

Units 1 through 17
16 hrs of Video + 16 hrs of Student Exercises & Solutions
= 32 hours total
Per ASME Y14.5-2009
GeoTol Pro Textbook Required (not included)

Format: DVD
Standard: 2009
Program: Pro Fundamentals
Weight:1lbs
Item #VD050   $8500.00
Close Window

GeoTol Pro Fundamentals Training – Complete Set

The GeoTol Pro Fundamental DVD video series is total of 17 units with 16+ hours of video and another 16 hours of student exercises and is based on the ASME Y14.5-2009 and ISO GPS standards.  It is designed to teach uniform application and interpretation skills to engineers, designers, inspectors, tool makers and shop floor personnel. It covers what personnel need to know in order to function and work in an organization that uses geometric tolerancing.

This comprehensive video allows you to effectively teach many different personnel at many different levels. The program is customizable where personnel can view the entire series or individual units can be selected to tailor the program to your needs. With this video program you are guaranteed to get the same presentation and interpretation every time from internationally recognized experts Scott and Al Neumann.  The video uses a sportscaster style format with Scott and Al talking back and forth to explain the concepts. There are hundreds of color slides and animated graphics used in the video. A majority of the geometric concepts are color animated slides and imbedded video clips to help provide the students with a rewarding educational experience. Wood and plastic models along are used extensively throughout the program with Scott and Al providing practical demonstrations of design applications and inspection procedures.  This makes the presentation interesting and easy to understand.

Page numbers in the video correspond to the pages in the accompanying programmed GeoTol Pro full color student workbook. This makes it easy for the students to follow along with the examples and complete program exercises and test their skills. The workbook will serve as a valuable reference long after the course is over. Take advantage of Scott and Al Neumann’s presentation that has been delivered, enhanced and refined for the past 30 years. The videos are flexible and allow the units to be combined and tailored to meet individual needs. Company parts and examples may be added to customize the presentation.

Each unit within the program takes about 1 to 2 hours to complete, depending on depth of coverage and number of student exercises. The videos are perfect in a learning library to retrain and train new hires. There are student class exercises sprinkled throughout the programs. Solutions to the class exercises are included along Scott and Al providing the rational for the solutions. This GeoTol Pro Fundamental video can be an important part of your overall quality strategy. Individual units are also available.

The GeoTol Pro Video Series earned a Platinum Award from the 2009 Ava Awards competition. The Ava Awards recognize outstanding achievement by creative professionals involved in the concept, writing, direction, shooting and editing of audio-visual materials and programs. There were more than 1,700 entries from throughout the United States, Canada and several other countries in the 2009 competition, which is sponsored and judged by the Association of Marketing and Communication Professionals. Only 210 entries received the highest platinum award level. www.avaawards.com

 

Close Window

GeoTol Pro Fundamentals Training – Complete Set

GeoTol Pro Complete Video Program – Contains 17 units plus 2009 update unit
Unit 1 Introduction - Symbols and Terms 77min
Unit 2 Limits of Size 47min
Unit 3 How the Geometric System Works Part 1&2 95min
Unit 4 Position Verification 34min
Unit 5 Product Plans and Virtual Condition 48min
Unit 6 The Datum Reference Frame I 76min
Unit 7 Datum Feature Modifiers 54min
Unit 8 The Datum Reference Frame II - Targets and Irregular Surfaces 47min
Unit 9 The Datum Reference Frame III - Advanced Concepts 77min
Unit 10 Form Tolerances 26min
Unit 11 Orientation Tolerances 35min
Unit 12 Profile Tolerances Part1&2 86min
Unit 13 Position Tolerances 50min
Unit 14 Coaxial Tolerances 58min
Unit 15 Fastener Formulas and Screw Threads 24min
Unit 16 Boundaries 39min
Unit 17 Application Exercises 65min
Total Length: 15.6 hrs of video
32 hrs w/ exercises
Update Unit Changes and improvements in ASME Y14.5-2009 65min

Pro Fundamentals · DVD · 2009
GeoTol Pro Fundamentals Training – Level 1

Units 1 to 6 and 10 to 11
8 hrs of Video + 8 hrs of Student Exercises & Solutions
= 16 hours total
Per ASME Y14.5-2009
GeoTol Pro Textbook Required (not included)

Format: DVD
Standard: 2009
Program: Pro Fundamentals
Weight:.5lbs
Item #VD051   $4500.00
Close Window

GeoTol Pro Fundamentals Training – Level 1

The GeoTol Pro Fundamental DVD video series Level 1 is total of 8 units with 8 + hours of video and another 8 hours of student exercises and is based on the ASME Y14.5-2009 and ISO GPS standards.  It is designed to teach the basic uniform interpretation skills to designers, inspectors, tool makers and shop floor personnel. It covers what personnel need to know in order to function and work in an organization that uses geometric tolerancing. It is part 1 of the Geometric Tolerancing Fundamentals video program and contains only units 1 to 6 and 10 to 11.

Close Window

GeoTol Pro Fundamentals Training – Level 1

GeoTol Pro Fundamentals Level 1 - Contains 8 Units
Unit 1 Introduction - Symbols and Terms 77min
Unit 2 Limits of Size 47min
Unit 3 How the Geometric System Works Part 1&2 95min
Unit 4 Position Verification 34min
Unit 5 Product Plans and Virtual Condition 48min
Unit 6 The Datum Reference Frame I 76min
Unit 10 Form Tolerances 26min
Unit 11 Orientation Tolerances 35min
Total Length: 7.3 hrs of video
16 hrs w/ exercises

Applications and Stacks · DVD · 2009
GeoTol Applications and Tolerance Stacks Program – Complete Set

Units 1 through 17
10 hrs of Video + 20 hrs of Student Exercises & Solutions
= 30+ hours total
Per ASME Y14.5-2009
GeoTol Applications and Stacks Textbook Required (not included)

Format: DVD
Standard: 2009
Program: Applications and Stacks
Weight:1.0lbs
Item #VD052   $7900.00
Close Window

GeoTol Applications and Tolerance Stacks Program – Complete Set

GeoTol Applications and Tolerance Stacks– Complete Set

The GeoTol Applications and Tolerance Stacks DVD video series is total of 17 units with 10+ hours of video and another 20 hours of student exercises and is based on the ASME Y14.5-2009 and ISO GPS standards.   The GeoTol Applications and Tolerance Stacks Program is an advanced tolerancing course for design engineers, drafters, manufacturing engineers, quality engineers and others involved with tolerance analysis or drawing review. Anyone looking for a deeper understanding of how to apply geometric tolerancing and perform tolerance analysis will greatly benefit from this course.

Prerequisite: GeoTol Pro Fundamentals Program Level 1 and 2.

Tolerance Stacks

The stacks section is contained in the first 6 units of this text, and is designed to teach students the fundamental principles of tolerance stacks.  The student will learn a variety of stack procedures, beginning with simple linear stacks on detail parts in units 1 and 2, and migrating to linear assembly stacks in Unit 3.  Unit 4 begins with axial detail stacks, and moves on to complex axial assembly stacks in unit 5.  Orientation tolerance stacks are covered in unit 6 and melded together with axial boundary assembly stacks to provide the participant with a complete understanding of the stacks process.  Students will use this knowledge to perform tolerance stacks to ensure the design criteria is met in the application case study problems.

Design Applications

The applications section is a total of 10 units, (7 thru 17). Unit 7 begins with a quick review of the fundamentals of geometric tolerancing and a few basic applications of geometric tolerancing on simple detail parts. The following units are a series of case study examples, where the students will learn to establish datum reference frames and apply geometric tolerancing to a variety of parts.  There are a multitude of simple to complex sheet metal, cast, turned and milled parts, and welded assemblies. The case study examples start out simple, but generally grow in complexity as the units progress.  In the beginning of each unit there will be an introduction explaining the issue at hand and the necessary functional requirements to be met.  Some examples provide detailed explanation, and in other instances, examples are incomplete by intent to make the problem less complex. After the parts are toleranced to achieve functional requirements, there are tolerance analysis stacks and reallocation exercises the student must perform to ensure the parts meet the established requirements detailed in each introduction.

How to use this course

This course provides complete flexibility in the learning process and can be customized to meet your needs. Students can use this video program to learn only tolerance stacks, only design applications or a combination of both. The tolerance stacks sections must be completed sequentially in order from unit 1 to 6.  The applications section may be taken in any order, applying tolerance to sheet metal, machined parts, simple or complex problems. To make the learning experience exciting, it is recommend the student alternately completes a lesson in the stacks units, and afterwards, solves a case study problem from the applications units. This format provides variety in the lessons and provides practical applications at the same time.  The student can work problems in any order in the application section.  In order to solve the stacks problems in the case study examples, there will be prerequisites from the stacks units the student must first complete. The prerequisites for the stack exercises are shown after the title on the top of the exercise page in the video and the textbook, and following the title page of each application. The solutions along with the rational for the solutions are included.   There are a total of 39 links in the DVD video program where a student or leader can click and quickly jump to a particular lesson within the video series.  This make the video series simple and easy to use and understand.

Take advantage of Scott and Al Neumann’s sportscaster style presentation that has been delivered, enhanced and refined for the past 30 years. The videos are flexible and allow the units to be combined and tailored to meet individual needs. Company parts and examples may be added to customize the presentation.  Each unit within the program takes about 1 to 2 hours to complete, depending on depth of coverage and number of student exercises. The videos are perfect in a learning library to retrain and train new hires. Solutions to the class exercises are included along with Scott and Al providing the rational for the solutions. This GeoTol Pro Applications and Tolerance Stacks video can be an important part of your overall quality strategy. The videos are perfect for a group in a conference room, lunch and Learn or individual learning library setting to retrain and train new hires. Individual units are also available.

Close Window

GeoTol Applications and Tolerance Stacks Program – Complete Set

Fundamentals · DVD · 1994
Fundamentals Program – Complete Set

16 DVD, Units 1-16 (24-30 hours)
Per ASME Y14.5M – 1994

Format: DVD
Standard: 1994
Program: Fundamentals
Weight:.5lbs
Item #VD040   $5500.00
Close Window

Fundamentals Program – Complete Set

Close Window

Fundamentals Program – Complete Set